Product Details
Wedge Washers
These convenient wedge shaped washers can be used on each side of the instrument panel to angle a control (approximately 6.5 degrees) to avoid interference behind the panel.
- 9/16″ ID
- For non-certified aircraft only
Replacement Parts for McFarlane Push-Pull Controls
We offer a variety of replacement parts to service your McFarlane push-pull controls.
- Adjustable Friction Lock Service Kits
- Boots
- Knobs
- Retaining Nuts and Lock Washers
- Threaded Wear Sleeve Nuts and Lock Washers
- Miscellaneous
- Dual Throttle Hardware Kit P/N 6408
| Part Number | Description | Use Eligibility |
|---|---|---|
|
EC12SK |
Friction Packing Service Kit |
Throttle controls using a 1/2″ friction nut |
|
EC312SK |
Friction Packing Service Kit |
Throttle controls using a 9/16″ friction nut |
| Part Number | Description | Use Eligibility |
|---|---|---|
|
235 |
3/16″ Pushrod Boot |
Controls with a 3/16″ pushrod |
|
272 |
1/4″ Pushrod Boot |
Controls with a 1/4″ pushrod |
|
EC04 |
Swivel Boot with Spring Lock |
Controls employing a swivel joint |
| Part Number | Description | Use Eligibility* |
|---|---|---|
| 1536A or 1536B | T-Handle: B, C, GN, L, R, W, or Y | Various controls |
| 6277 | Round: R, B, L, or C | MCC1XXDLLL and MCUX24-LLL series controls |
| 6277 | Round, engraved with “CHOKE”:RC, BC, LC, or CC | MCC1XXDLLL series controls |
| 6277 | Round, engraved with “CABIN AIR”:RA, BA, LA, or CA | MCUX24-LLL series controls** |
| 6277 | Round, engraved with “DEFROST”:RD, BD, LD, or CD | MCUX24-LLL series controls** |
| 6277 | Round, engraved with “CABIN HEAT”:RH, BH, LH, or CH | MCUX24-LLL series controls** |
| 6277 | Round, engraved with “PARK BRAKE”:RP, BP, LP, or CP | MCUX24-LLL series controls** |
| 6307-BK | Round, Black | Various Cessna controls |
| 6307-RD | Round, Red | Various Cessna controls |
| 6378 | Fuel Strainer Drain | MCS1517 series controls |
| 6417 | T-Handle | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6418 | T-Handle, Turn-to-Lock | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6427 | 4 Prong | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6428 | 4 Prong, Turn-to-Lock | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6429 | Fluted | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6430 | Fluted, Turn-to-Lock | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6432 | T-Handle, Shortened | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6489 | Square: R, B, L, or C | MCUX24-LLL series controls** |
| 6489 | Square, engraved with “CARB HEAT”:RB, BB, LB, or CB | MCUX24-LLL series controls** |
| 6495 | Phenolic, Black: -01B, -02B, -03B, -04R or -04B | MCUX24-LLL series controls** |
| 6512 | Triangle: R, B, L, or C | MCUX24-LLL series controls** |
| 6570 | Red Vernier-Assist Knob | Vernier-Assist Mixture controls |
| 6620 | 1/4-20 Black Vernier-Assist Knob | Vernier-Assist Throttle controls |
| 6660 | T-Handle, Turn-to-Lock,engraved with “Choke Lock” | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6661 | Fluted, Turn-to-Lock,engraved with “Cabin Heat Lock” | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6662 | Fluted, Turn-to-Lock,engraved with “Airbox Lock” | MCTXXXX-LLL and MCTLXXX4DLLL series controls |
| 6730 | Prop, Vernier-Assist | MCVA Vernier-Assist controls |
| EC03 | 1/4-20 Black Knob | Throttle controls |
| EC125-1 | Hemisphere, Black | Throttle controls |
| EC53 | 1/4-20 Black Ball Knob | P/N MC12693-04 and MC455-139MCT1XXDLLL, MCTLXXX4DLLL, MCTLXXXX-LLL and MCC1XXDLLL series controls |
**For all knob options for the MCUX24-LLL Universal Light-Weight Controls, go to Light-Weight Control Knob Options.
| Part Number | Description | Use Eligibility* |
|---|---|---|
| 6060-8 | 1/2-20 Retaining Nut | Throttle controls using 1/2-20 threaded fittings |
| EC111 | 1/2″ Lock Washer | Throttle controls using 1/2″ threaded fittings |
| EC119 | 3/4-16 Extended Panel Nut | Controls with a 3/4-16 thread |
| MS35333-40 | 1/4″ Steel Lock Washer | MCT1XXDLLL, MCTLXXX4DLLL, MCTLXXXX-LLL, and MCC1XXDLLL series controls |
| MS35333-44 | 1/2″ Lock Washer | |
| 6060-12 | 3/4-16 Retaining Nut | Throttle controls using 3/4-16 threaded fittings |
| EC112 | 3/4″ Lock Washer | Throttle controls using 3/4″ threaded fittings |
| MS35333-47 | 3/4″ Lock Washer | |
| 6133 | 7/16-20 Retaining Nut | Throttle controls using 7/16-20 threaded fittings |
| 6196 | 3/4-24 Stainless Steel Jam Nut | MCUX24-LLL series controls |
| 6197 | 3/8″ Lock Washer | MCUX24-LLL series controls |
| 6260 | 7/16-20 Retaining Nut, Modified | MC6350 dual push-to-unlock controls |
| EC38 | 7/16″ Lock Washer | P/N MC565-548 series controls |
| EC61 | 3/8″ Lock Washer | P/N MC12693-04 or MC455-139 |
| EC62 | 3/8-24 Stainless Steel Retaining Nut | P/N MC12693-04 or MC455-139 |
| EC65 | Throttle Spacer Bushing | P/N MC12693-04 or MC455-139 |
| Part Number | Description | Use Eligibility |
|---|---|---|
|
EC33 |
1/4-20 Stainless Steel Jam Nut for Knobs |
Throttle controls using 1/4-20 threaded fittings |
|
EC38 |
7/16″ Lock Washer |
P/N MC565-548 series controls |
|
EC70 |
12M x 1.25 Jam Nut |
P/N MC565 series controls |
|
EC72 |
12mm Lock Washer |
P/N MC565 series controls |
| Part Number | Description | Use Eligibility* |
|---|---|---|
| 6135 | 1/8″ Ball Bearing | MC6150 and MC6250 push-to-unlock controls |
| 7391-0.300 | 3/8″ Ball Bearing Halves | McFarlane Manufactured Beechcraft Controls |
| 6289 | Decal, “Carb Heat” | Piper carburetor heat controls |
| 6409 | 0.05 Allen Wrench | MCTL1014D series controls |
| 6290-06-12K | Panel Hole Reducer | Adapts a 0.375″ control to a 0.75″ hole |
| 6290-08-12K | Panel Hole Reducer | Adapts a 0.5″ control to a 0.75″ hole |
| 6416 | Pin, Turn-to-Lock | MCTLXXX4DLLL and MCTLXXXX-LLL series controls |
| 6420 | Ferrule, Turn-to-Lock, Brass | MCTLXXX4DLLL and MCTLXXXX-LLL series controls |
| 6423 | Ferrule, Turn-to-Lock, Nylon | MCTLXXX4DLLL and MCTLXXXX-LLL series controls |
| 6424 | Conduit Terminal | MCT1XXDLLL, MCTLXXX4DLLL, and MCC1XXDLLL series controls |
| 6433-1 | Conduit Clamp | MCQ1XXDLLL series controls |
| 6515 | Barrel Stop Assembly | MCTL1014D and MCC101D series controls |
| EC89 | Wedge Washer | Use on each side of instrument panel to angle a control |
| EC98 | 9/16″ Friction Adjust Wheel | Throttle controls using a 9/16″ friction nut |
| M83248/1-006 | O-ring | MCC1XXDLLL series controls |
| MS35650-304 | Jam Nut | MCC1XXDLLL series controls |
| Part Number | Description |
|---|---|
|
6408 |
Kit contains the following: |
|
6271 |
2 each Slip Fit Conduit Terminal Assemblies |
|
6270 |
2 each Cable Stop Assemblies |
|
6822 |
1 each Spring, Red, Left |
|
6822 |
1 each Spring, Blue, Right |
|
Hex Wrench |
1 each |
| Part Number | Description |
|---|---|
|
XX |
Cable/wire type |
|
LLL |
Part length |
|
MCUX24-LLL |
Universal Light-Weight Control |
|
MCT1XXDLLL |
Dual Throttle |
|
MCTLXXX4DLLL |
Dual Turn-to-Lock |
|
MCTLXXXX-LLL |
Single Turn-to-Lock |
|
MCC1XXDLLL |
Dual Control |
|
MCQ1XXDLLL |
Dual Quadrant Control |
Eligible Aircraft
| Make | Model | Start S/N | End S/N |
|---|---|---|---|
| Many | Many | 0 | ZZZZZZZZZZZZZZZ |
