Product Details
Pulsar 650 Series Navigation and Anti-Collision Lights
Technical Specifications:
- Navigation Color: Red (-L) or Green (-R)
- Voltage: 12V or 24V
- Dimensions: 4.0″ x 1.9″ x 1.5″
Pulsar 650 LED Navigation light (formerly Pulsar NS) serves as a two-in-one light—a navigation light for directional red and green positioning, and a strobe light to increase visibility in both daylight and night flight. Designed with an industry-standard mounting footprint, an aerodynamically low drag profile, standard three-position mounting screw pattern with a patented mounting bracket, they are ideal for replacing legacy light installations.
Additional Information:
- Mounting bracket included
- No external power supply required
- Strobe synchronization available
- Low power consumption
- Easy installation
The SunTail (Anti-collision Strobe and Position) light P/N 11-1260-12 for the tail of the aircraft is recommended with the Pulsar 650 series lights. The strobes on the SunTail and Pulsar 650 series lights will sync to strobe together.
Part Number Information
Supersedes Part Numbers
01-1180-B
Cross-reference information
Cross Reference Reference only: Please verify this product is appropriate for your use case before adding to your cart. OEM Part Number McFarlane Part Number Comment 01-1180-B 01-1280-B-12-L
Additional product information
SupersedesPartNumber: 01-1180-B
Frequently Asked Questions
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip. The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers. The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry. If there are modifications to the wiring, a 337 should be submitted for approval for the installation. If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
