Product Details
Throttle, Prop and Mixture Controls for Mooney Aircraft
Quality FAA-PMA Approved Controls by McFarlane
- Solid metal construction
- Pilot friendly knobs
- Lifetime lubrication
- Superior low friction conduit
*Microswitch Dust Boot and ICA included with microswitch cutout controls. Our boot keeps foreign objects out of the control and prevents contamination lock-up.
Catalog information
McFarlane Push-Pull Control Wrench Set
Install and remove push-pull control nuts behind the panel
MT Composite Propellers also Available for Mooney Aircraft.
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Qty/Aircraft | Location | Eligibility Chart |
|---|---|---|---|---|---|---|
| Mooney | M20E | 21-0001 | 21-0037 | 1 | Control, Throttle | 1640 |
| Mooney | M20E | 21-0039 | 21-1180 | 1 | Control, Throttle | 1640 |
| Mooney | M20E | 690001 | 690073 | 1 | Control, Throttle | 1640 |
| Mooney | M20E | 700001 | 700061 | 1 | Control, Throttle | 1640 |
| Mooney | M20F | 22-0001 | 22-1439 | 1 | Control, Throttle | 1640 |
| Mooney | M20F | 690001 | 690092 | 1 | Control, Throttle | 1640 |
| Mooney | M20F | 700001 | 700072 | 1 | Control, Throttle | 1640 |
| Mooney | M20J | 24-0002 | 24-0377 | 1 | Control, Throttle | 1640 |
Part Number Information
Supersedes Part Numbers
660166-007 | 660166-7
Cross-reference information
Cross Reference Reference only: Please verify the product is eligible for your aircraft before adding to your cart. OEM Part Number McFarlane Part Number Comment 660166-007 MC660166-007 660166-7 MC660166-007
Additional product information
Approval: FAA PMA SupersedesPartNumber: 660166-007 SupersedesPartNumber: 660166-7
Product Documents
Frequently Asked Questions
My Vernier-Assist Throttle control came apart during installation or maintenance. Can it be put back together?
Yes, this is common and can put back together, provided no components are missing.
Why is my new engine control too long/short?
There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.
What is the minimum bend radius for my engine control?
McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect?
The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
How do I clean and sanitize a McFarlane Push-Pull Control?
We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.
