Product Details
This control features a ball shape knob.
Throttle Control for Dual Carburetor 912/914 Series Rotax Engines
Innovative design allows a neat, clean installation without a clunky splitter box
- Super-smooth friction lock
- Quality all metal construction
- High temperature Teflon lined for smooth, consistent control
(Cheapy controls with poly liners will not tolerate engine temperatures) - Available in 4, 6, 8, 12 foot and custom lengths
- Measured from panel fitting to end of conduit, wires extend 6 inches beyond conduit
- Easily trimmed to length
- Versatile threaded conduit terminals for easy adjustment (M6x1-6g x 1 inch thread)
- Adjustable cable stops to limit travel
- Two knob styles available: Ball (-B) or standard barrel shape
- Manufactured to the same quality standards as McFarlane’s FAA-PMA parts
Includes throttle hardware kit P/N 6408 with lightweight throttle return springs P/N 7140 to prevent throttle creep.
Specifications:
- Panel Fitting: 1/2-20 UNF x 0.67 inch thread
- Slip Fit Conduit Terminals: 2 each with M6x1-6g x 1.00 inch thread
- Conduit: 0.188 inch OD Teflon lined wound conduit
- Inner Wire: Heavy duty 0.062 inch diameter, 1×7 stainless steel twisted wire per MIL-DTL-87161
- Travel (stroke): 3.75 inch maximum
- Design Work Loads:
- Push: Not applicable (designed for pull loads only)
- Pull: 10 lbs maximum
- Typical Locking Force: 1 to 10 lbs (locking force dependent on friction lock engagement)
- Operating Temperature: -65 to 450 deg F
- See McFarlane Dual Throttle Controls for further specifications.
For more details, see the Press Release.
These controls are not for use on certified aircraft, or for flight controls or flight control trim tabs.
Eligible Aircraft
| Make | Model | Start S/N | End S/N |
|---|---|---|---|
| Many | Many | 0 | ZZZZZZZZZZZZZZZ |
Product Documents
Frequently Asked Questions
I purchased a laser engraved knob and the thickness of the marking is very shallow. What kind of wear resistance can I expect?
The laser marking does not harm the hard durable anodize coating on the aluminum knob. The CO2 laser process only bleaches the color from the anodizing leaving a silver white color that contrasts with the surrounding dyed anodize. The durability of the laser marked area is not affected by the laser. Our tests have shown that the laser process actually improves the corrosion resistance of the anodize layer. The CO2 laser engraves aluminum knobs by vaporizing the surface leaving a deep durable groove. This groove is then filled with a special paint for contrast. The result is a durable long lasting mark.
Why is my new engine control too long/short?
There are several things that could be different such as engine/aircraft modifications, rigging/clocking of control arm or adjustment of rod end will be needed, placement of clamps or brackets may be different, or a previous installation change such as routing from original.
What is the minimum bend radius for my engine control?
McFarlane's Storage and Packaging Specification requires a specific packaging minimum radius based on the length of the control, type of wire used, and the configuration of the control end(s). Please contact us to determine the exact requirements for your specific control.
How do I trim my engine control to length?
Please reference the Installation Instructions included with your new control.
My Vernier-Assist Throttle control came apart during installation or maintenance. Can it be put back together?
Yes, this is common and can put back together, provided no components are missing.
How do I clean and sanitize a McFarlane Push-Pull Control?
We make the following cleaning and sanitizing recommendations to be completed between flights: Recommended Cleaning Process 1. Put on clean disposable gloves prior to cleaning and disinfection. 2. Pull controls back to the fully retracted position to expose the full length of the control shafts. 3. Apply isopropyl alcohol to a clean microfiber towel. Do not spray any solution directly on the controls or any other surfaces or components in the aircraft. !!! WARNING: DO NOT USE BLEACH WIPES ON ANY MCFARLANE CONTROL !!! 4. Gently and thoroughly wipe down every control knob surface and control shaft. 5. Let cleaning solution dry on these surfaces (contact time). 6. Use a clean and dry microfiber cloth to wipe away any solution residue left on knob and control shaft surface. 7. Remove all gloves, towels, and cleaning supplies from the work area in the aircraft. Please contact McFarlane Sales directly at 866-920-2741 or 785-594-2741 or sales@mcfarlaneaviation.com if you have any additional questions regarding the disinfection of our controls.
