Product Details
Elevator Neutral Rigging Tool Replacement Parts
Save time, you’ll always have the correct tool!
Proper elevator rigging is necessary for full range of motion and maneuverability of the airplane. Many Cessna maintenance manuals require the fabrication of a tool to hold the yoke in the neutral position while the mechanic rigs the elevator control system. These tools utilize the holes for the control gust lock. At least 17 different sizes of rigging tools are required to cover the various Cessna aircraft. Now there is one tool to replace them all!
The McFarlane Elevator Neutral Rigging Tool is adjustable from 0.4″ to 2.5″ and universal in design, consisting of six different pin sizes to fit your application. This tool may also be used to properly rig other makes of aircraft with similar elevator neutral rigging requirements.
| TOOL126 Elevator Neutral Rigging Tool Replacement Parts | |
| Part Number | Description |
| 6409 | .050″/1.3mm Hex Wrench |
| 6870 | Square Nut |
| 6868-4 | Pin, .188, Short |
| 6868-3 | Pin, .188, Long |
| 6868-1 | Pin, .209, Short |
| 6868-2 | Pin, .209, Long |
| 6869-1 | Pin, .250, Short |
| 6869-2 | Pin, .250, Long |
Eligible Aircraft
| Make | Model | Start S/N | End S/N |
|---|---|---|---|
| Cessna | Many | 0 | ZZZZZZZZZZZZZZZ |
