Product Details
Superflite Aircraft Engine Enamel
One quart can of gloss black engine paint
Developed specifically for air cooled aircraft engines used in the light duty aviation industries.
Mixing ratio: Mix well before use. May be used as supplied or for best air spray add 10-15% enamel reducer by volume just prior to application.
Pot life: When properly covered at 77ºF, will maintain a sprayable viscosity for an indefinite period of time.
Suitable substrates:
- Properly treated steel or aluminum
- Epoxy primers
- Etching primer
Surface prep:
- Wash surface with mild detergent and rinse with water. Dry surface.
- After drying, sand and featheredge surface where needed.
- Wipe with a post sanding cleaner following manufacturer’s direction.
*Ground shipping only.
Note: Hazardous product
Before using, read all MSDS, application instructions, and warnings. Always wear properly fitted air purifying respirator with organic cartridges and a particulate filter or a fresh air supplied respirator (depending on product selection), eye protection, gloves, and protective clothing while exposed to any chemical.
