Product Details
Microburst™ Plus Series Navigation/Anti-Collision Wing Tip and Tail Lights
Self-contained (no external power supply required) Wing Tip and Tail Lights for experimental and light sport aircraft. LEDs are light weight, aerodynamic, low current, and incredibly bright, as well as vibration and moisture resistant. Lights are syncronizable (wing tip and tail lights will flash at the same time).
Each light comes with CometFlash®
CometFlash® is a major advancement in the field of safety lighting. By pulsing the flash tube four times in rapid succession, the effective “on-time” of the strobe is increased from 0.002 seconds to 0.4 seconds increasing aircraft visibility.
These assemblies provide navigation and anti-collision functions just like the original assemblies, but with an updated internal optic reflector design. The new reflector not only improves the aesthetics, it also provides greater light output performance in the same package.
Technical Specifications:
- Operating Voltage: 14VDC
| Voltage | Recognition Type | Color | Part Number | Description |
|---|---|---|---|---|
|
14 |
Navigation, Anti-Collision, Position |
Red/Green & White |
01-0471507-00 |
Red and green pair of Forward Navigation and white Tail Position Lights, Anti-Collision Light Wing Tip Assembly, LED-Strobe and rear facing white Position/Anti-Collision Light |
|
14 |
Navigation, Anti-Collision, Position |
Red/Green & White |
01-0471519-01 |
Red and green pair of Forward Navigation/Anti-Collision Wing Tip Assembly |
|
14 |
Navigation, Anti-Collision, Position |
Red/Green & White |
01-0471519-00 |
Red and green pair of Forward Navigation Light/Anti-Collision Light Wing Tip Assembly, white Tail Position/Anti-Collision Light Assembly |
|
14 |
Navigation, Anti-Collision, Position |
White |
01-0771490-00 |
White Tail Position/Anti-Collision Light Assembly |
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|
| Many | Many | 0 | ZZZZZZZZZZZZZZZ | 1546 |
Frequently Asked Questions
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip. The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers. The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry. If there are modifications to the wiring, a 337 should be submitted for approval for the installation. If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
