Product Details
90724 Series LED Anti-Collision Beacons
The 90724 series are self-contained (no external power supply required) LED Anti-Collision Beacons. The solid-state circuitry and LED light source makes the “old style” mechanical oscillating beacons and the Whelen 90044 series quartz halogen flashing beacons obsolete. Benefits include no moving parts, no EMI/RFI, no inrush current spikes and crisp on-off cycles.
Tech Specifications:
- Power Consumption: 0.45 amps at 28VDC
- LED Color: Aviation Red
- Weight: 1.8 pounds (816gm)
- Exposed Height: 2.70″ (69mm)
- Lens Color: Clear glass
| Voltage | Color | Part Number | Mount/Connection |
| 28 | Red | 01-0790724-12 | Upper 5-Hole Mount, Cable Pigtail |
| 28 | Red | 01-0790724-14 | 5-Hole Rudder Mount, Cable Pigtail |
| 28 | Red | 01-0790724-19 | Lower 8-Hole Mount, Cable Pigtail |
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|
| Many | Many | 0 | ZZZZZZZZZZZZZZZ | 1546 |
Part Number Information
Additional product information
Approval: FAA TSO (DocumentNumber: TSO-C96A)
Frequently Asked Questions
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip. The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers. The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry. If there are modifications to the wiring, a 337 should be submitted for approval for the installation. If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
