Product Details
Crew Rails and Cargo Tracks for Cessna Caravan
The manufacturing leader of seat rails now has FAA-PMA approval on rails and tracks for 208 series aircraft!
- FAA-PMA direct replacements
- Improved thickness and stability
- Fits all Cessna 208/208B aircraft
- Anodized for superior wear and corrosion resistance
- Precision fit
The primary source of failure for these tracks is corrosion. This is most likely due to moisture and de-icing compounds getting exposed to the surface of the aluminum and causing corrosion over time. McFarlane has improved the surface protection on our tracks and rails by anodizing per MIL-A-8625, Type II, providing a far superior wear and corrosion resistant surface. McFarlane rails and tracks are also primed per MIL PRF-23377 on the underside and top of the flanges of the extrusions. McFarlane will also top coat paint the primed area with a top coat polyurethane paint per MIL-PRF-85285 as recommended for corrosion protection in the Cessna 208 maintenance manual. The upper section of the extrusions are not painted or primed to prevent any interference issues with the seat clamps/lugs and cargo attachments interface with these edges.
With two versions available, drilled or undrilled, McFarlane seat rails will meet your needs.
McFarlane offers the Seat Rails with the rivet holes drilled in the bottom flange, and in an “S” suffix part number which has the rivet holes in the flange omitted. This undrilled version allows for easier installation in a replacement part situation as it allows the installer to match drill the original holes from the frame/aircraft to the seat rail.
To order undrilled rails, add an “S” suffix to the part number.
Example: P/N MC2601088-1 (drilled) and P/N MC2601088-1S (undrilled).
Note: Due to this product’s length and required packing material, the estimated freight charge quoted at the time of checkout may not be correct. Additional shipping and crating charges on top of the quoted freight charge may also apply. For an accurate estimate of actual shipping costs, please email your address and preferred ship method to our Shipping department at [email protected].
| Domestic | International |
|---|---|
|
USPS Priority – up to 84″ |
USPS Priority – up to 60″ |
|
USPS Parcel Post – up to 106″ |
UPS – Up to 108″ |
|
UPS Ground – up to 108″ |
FedEx Express – up to 106″ |
|
FedEx Ground – up to 108″ |
Freight carrier – 109″ to 180″ |
|
FedEx Express – up to 119″ |
|
|
Freight carrier – 120″ to 180″ |
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Qty/Aircraft | Location | Comment | Eligibility Chart |
|---|---|---|---|---|---|---|---|
| Cessna | 208 | 20800001 | 20800219 | 4 | Pilot & Copilot | Without cargo barrier | 7228 |
| Cessna | 208 | 20800294 | 20899999 | 4 | Pilot & Copilot | Without cargo barrier | 7228 |
| Cessna | 208B | 208B0716 | 208B9999 | 4 | Pilot & Copilot | Passenger version. Without cargo barrier | 7228 |
| Cessna | 208B | 208B0716 | 208B9999 | 4 | Pilot & Copilot | Cargo version. Without cargo barrier | 7228 |
Part Number Information
Supersedes Part Numbers
2613039-1 (Textron, Inc.)
Cross-reference information
Cross Reference Reference only: Please verify the product is eligible for your aircraft before adding to your cart. OEM Part Number McFarlane Part Number Comment 2613039-1 MC2613039-1
Additional product information
Approval: FAA PMA SupersedesPartNumber: 2613039-1 (Manufacturer: Textron, Inc.)
Frequently Asked Questions
What is the standard hole depth for drilling additional holes in seat rails?
Determine which extrusion is used: STE101 and STE102 – Standard hole depth drilled on the roller flange is .330” and standard diameter is .277”. STE103 and STE104 – Standard hole depth drilled on the roller flange is .280” and standard diameter is .277”.
Can I replace rivets with screws when replacing my seat rails?
Yes, but there are some restrictions. The screws must be structural screw with a minimum tensile strength of 50ksi. See SAIB CE-90-03R2 for more details.
Can use blind rivets (e.g., CherryMAX or CherryLOCK) when replacing my seat rails?
We do not recommend using blind rivets for seat rail installation.
