Product Details
Stene Wing Tips for AeroLED Lighting
Optimized for use with AeroLED Pulsar LED navigation/strobe lighting
The wing tips are built by Stene Aviation using the latest resins and aviation grade E-glass weaves to ensure the highest quality of part.
To find the lights for your aircraft, go to AeroLED Lighting.
Stene Aviation Products
High quality FAA-PMA replacement parts at affordable prices
Stene Aviation fiberglass replacement parts are five times stronger than the original plastic parts offered by Cessna. They are exact replacements of the originals and come primed and ready for paint. The product line includes Cessna wing tips, strut cuffs, fin caps, rudder caps/bottoms, stabilizer tips, wheel pants and much more.
Most parts in stock for immediate shipment.
Installation Instructions Stene Aviation Fairings
Note: Mounting hardware is not included, unless noted above.
Eligible Aircraft
| Make | Model | Start S/N | End S/N | Eligibility Chart |
|---|---|---|---|---|
| Cessna | 172M | 17260759 | 17263458 | 6343 |
| Cessna | 172M | 17263459 | 17267584 | 6343 |
| Cessna | 172N | 17267585 | 17274009 | 6343 |
| Cessna | 172P | 17274010 | 17276654 | 6343 |
| Cessna | 172Q | 17275869 | 17276211 | 6343 |
| Cessna | 172RG | 172RG0001 | 172RG1191 | 6343 |
| Cessna | R172K | R1722000 | R1723454 | 6343 |
| Cessna | 180J | 18052285 | 18052384 | 6343 |
| Cessna | 180J | 18052385 | 18052770 | 6343 |
| Cessna | 180K | 18052771 | 18053203 | 6343 |
| Cessna | 182P | 18260826 | 18262465 | 6343 |
| Cessna | 182P | 18262466 | 18265175 | 6343 |
| Cessna | 182Q | 18265176 | 18267715 | 6343 |
| Cessna | 182R | 18267716 | 18268586 | 6343 |
| Cessna | 182S | 18280001 | 18280944 | 6343 |
| Cessna | R182 | R18200001 | R18202041 | 6343 |
| Cessna | T182 | 18267716 | 18268541 | 6343 |
| Cessna | TR182 | R18200584 | R18202041 | 6343 |
| Cessna | A185F | 18502091 | 18502310 | 6343 |
| Cessna | A185F | 18502311 | 18504448 | 6343 |
| Cessna | 188 | 188-0001 | 188-0572 | 6343 |
| Cessna | 188A | 18800573 | 18800832 | 6343 |
| Cessna | 188B | 18800833 | 18802348 | 6343 |
| Cessna | A188 | 188-0001 | 188-0572 | 6343 |
| Cessna | A188A | 18800573 | 18800832 | 6343 |
| Cessna | A188B | 18800833 | 18802348 | 6343 |
| Cessna | A188B | 18802349 | 18803973 | 6343 |
| Cessna | A188B (w/ large hopper) | 18800833T | 18802348T | 6343 |
| Cessna | A188B (w/ large hopper) | 18802349T | 18803973T | 6343 |
| Cessna | T188C | T18803325T | T18803974T | 6343 |
| Cessna | 206H | 20608001 | 20608361 | 6343 |
| Cessna | T206H | T20608001 | T20608361 | 6343 |
| Cessna | TU206F | U20601701 | U20602199 | 6343 |
| Cessna | TU206F | U20602200 | U20603521 | 6343 |
| Cessna | TU206G | U20603522 | U20607020 | 6343 |
| Cessna | U206F | U20601701 | U20602199 | 6343 |
| Cessna | U206F | U20602200 | U20603521 | 6343 |
| Cessna | U206G | U20603522 | U20607020 | 6343 |
Part Number Information
Additional product information
Approval: FAA PMA
Product Documents
Frequently Asked Questions
What is the difference between the Pulsar NS and the Pulsar NSP?
The Pulsar NS has a forward red or green navigation light and a strobe that covers 180 degrees from each wing tip. The Pulsar NSP has a forward red or green navigation light, a strobe that covers 180 degrees from each wing tip, and a rear white position light.
What are the installation requirements for the SunSpot 36 and 46?
The SunSpot 36LX landing and taxi lights and SunSpot 46LX can be installed with just a log book entry if you can install the light in an existing mount and use the existing wires, switches, and circuit breakers. The SunSpot 36HX landing and taxi lights and SunSpot 46HX can be installed with the pulse function enabled in any model listed on the AML under STC, or in other aircraft models with a 337 that uses the AML STC as a basis for approval.
What are the installation requirements for the TSO lights?
If the lights are mounted to an existing mounting location with no structural modifications and existing wiring can be re-used, the lights can be installed with a log book entry. If there are modifications to the wiring, a 337 should be submitted for approval for the installation. If there are structural modifications made to mount the lights, a more extensive approval may be required, ranging from a 337 to an STC.
What is the recommended wire for the Pulsar and SunTail lights?
We recommend 3 conductor 20 gauge shielded single bundle wire.
